Flash Drive Will Not Show Up On Mac

The USB flash drive is a portable storage device. Torrent ni komplete 4 crack. It serves many purposes such as,

• 1. Storing and transferring data or files.

• 2. It saves you a lot of stress of carrying bulky files or documents around.

• 3. It can serve as a backup as well for important documents you do not want to lose.

But it can be frustrating at times when your USB Flash Drive is not showing up on your Mac and you are unable to access your files, right? However, when in such situations it is not advisable to do anything you are unsure about as it could harm your computer system. We provide you with solutions to fix flash drive not showing up on Mac.

As a result, your flash drive is not showing up on Mac. You can reformat the flash drive on Mac, but this process will erase all data. Flash Drive is Corrupted: Mac System does not show up a corrupted flash drive. In case it detects that the flash drive is corrupted, it will simply ask you to format the drive and erase all data.

From a working Mac open Disk Utility and reformat the thumb drive to GUID partition map and create a Mac OS Extended (Journaled) partition, that should fix the thumb drive. Now either launch the OS installer or use the command line arguments to create a bootable drive and setup the OS installer. USB Not Showing Up on Mac. Many people are complaining about the same problem on the internet: USB not showing up on Mac (flash drive not showing up Mac, SD card not showing up Mac, or thumb drive not showing up Mac). Most of the time, the flash drives are connected to Mac through USB, but you may be disappointed to find out that Mac won't.

• • Method 1: Connect the USB Flash Drive Manually

  • Method 2: Check the Finder Preference

  • Method 3: Update Your Mac's OS and Firmware

  • Method 4: Use Terminal to Fix USB Errors

  • Method 5: Reset the System Management Controller (SMC)

There are several reasons that may lead to external flash drive not showing up on Mac and some of such errors can be caused by any of the following: Outdated drivers, Corrupted USB, A glitch in the motherboard. Our easy steps which will be outlined below will help get your USB Flash Drive working correctly again. There are several methods that you can follow to provide lasting solutions to fix flash drive not showing up on Mac.

1Connect the USB Flash Drive Manually

Step 1: On inserting your USB Flash Drive, it is expected to show up on your Mac, but if this does not happen, try the following steps. Locate 'Applications and select Utilities', select the 'System Information'.

Step 2: Check if the system is able to detect the USB flash drive.

Step 3: Select USB (which is on the left panel), after doing this, the information about the USB Flash Drive is expected to be displayed. However, In case where nothing is displayed or if the USB is not displayed, you should disconnect the drive and insert into another port.

2Check the Finder Preference

Step 1: On the Finder Preference, go to 'Finder' and select 'Preference'. Select the 'General' Tab.

Step 2: In the General Tab, you will find listed items. Ensure that the 'External disks' item is checked. Thereafter, go to the 'Sidebar' tab, under the Devices check on External disks.

3Update Your Mac's OS and Firmware

The firmware is responsible for power function control such as power and thermal management. It controls the fans, power switch and supports Sudden Motion Sensor and Ambient Light Sensor.

It is noteworthy that correct firmware updates are prevented by some USB and FireWire devices. Therefore, it is important to disconnect devices that are non-essential and use only apple products when applying the update.

4Use Terminal to Fix USB Errors

Disk utility can be used to repair minor or multiple problems associated with the disk such as repairing the USB Flash Drive that has become unrecognized or unreadable by your Mac computer.

Step 1: Go to 'utilities' on your Mac and type: diskutil list and press Return.

Step 2: Look for disk number of your flash drive, type: diskutil info disk2 and press Return. (replace 2 with the disk number of your flash drive.)

Step 3: Type: diskutil eject disk 2 and tap Return.

Step 4: Type: diskutil list and tap Return. When the USB flash drive disappears from the Terminal list, you can close the window.

Step 5: Close Terminal and open Console to check errors of your USB flash drive.

Step 6: Click 'Errors and Faults' to check if there are any errors of your USB flash drive.

Reconnect the USB flash drive back to your Mac. Your USB flash drive will be detected and work again after the operations listed above. After completing the above steps, you can check and use all files on the USB flash drive.

5Reset the System Management Controller (SMC)

Resetting System Management Controller can be very helpful because it restores your Mac to full normal functionality particularly relating power and hardware. Non-functioning USB ports might be an indication that your Mac needs an SMC reset. Use the following steps to reset SMC:

Start by Shutting down the Mac, disconnect the battery or power cord then Press the power button holding it down for at least 5 seconds. After that, reconnect the power cord or battery and Turn the Mac on.

For Mac Book

For Mac Notebooks which do not have removable batteries, use the following steps to reset your SMC. However, this differs and does not work on external keyboards so it is preferable to use built-in keyboards. Firstly, shut down the Mac Book and Connect the power cord. Then, hold the following keys simultaneously; 'Shift+Control+Option', Release all the keys at the same time and Start the MacBook.

In cases where the above method does not work as expected you can reset the PRAM/NVRAM. The following steps will solve the problem: Firstly, shutdown the Mac Book and hold down the following keys, Command + Option + P + R to restart the Mac. https://awentogte1975.mystrikingly.com/blog/supro-guitars-serial-numbers. These keys should held down until a sound beeps and screen flashes then you should allow the system to boot normally.

Restore Data from USB Flash Drive Not Showing up on Mac with AnyRecover

After fixing USB flash drive not showing up on Mac problem, data loss may occur. Don't panic. You can use data recovery software to restore your lost data from the USB flash drive. AnyRecover Mac Data Recovery is a USB data recovery software which is worth trying. It is able to recover photos, videos, documents and other file types from your external storage devices easily and quickly.

What Are AnyRecover's File Recovery Features?

AnyRecover is a premium data recovery software that helps you recover deleted lost webcam videos.

It offers you enhanced recovery rate such as improved search criteria, high speed recovery.

It is compatible with all storage devices and supports over 1000 file types including document, video, email, photo, and audio etc.

https://coolofiles799.weebly.com/malwarebytes-premium-3-0-2-422.html. Retrieve lost files from MacBook, iMac, MacBook Pro, MacBook Air, Mac Mini, Mac Pro, etc.

Recover lost data from the not showing up USB flash drive and unmountable USB flash drives.

Support Mac OS X 10.15, Mac OS X 10.14, Mac OS X 10.13, Mac OS X 10.12, Mac OS X 10.11, Mac OS X 10.9.

Steps to Recover Data from USB Flash Drive Not Showing up on Mac with AnyRecover:

Step 1: Download and install AnyRecover, connect the USB flash drive to your computer before the recovery process. Then select the location where you want to recover from, then click Start.

Step 2: AnyRecover would scan through the location of USB flash drive.

Step 3: Once scan is completed, you will be able to preview the files and recover it by clicking the 'Recover' tab.

To some degree, a USB flash drive can work as your portable hard disk. You can save photos, videos, documents and other files to the USB flash drive.

As a result, you can open those files on any computer after plugging the USB flash drive into the USB port. If you cannot see the flash drive mount on Mac, you just get into annoying trouble.

http://txqnvm.xtgem.com/Blog/__xtblog_entry/19077276-affinity-photo-beta-1-7-0-112#xt_blog. So why is your USB flash drive not showing up on Mac? Here are common reasons for USB flash drive not detected or recognized problems. Thus, you can find the corresponding solutions to fix USB flash drive not showing up or recognized on Mac.

1. Physical damages.
2. The USB port is not working.
3. Format the USB flash drive improperly.
4. USB firmware is corrupted.
5. The outdated system cannot recognize your USB flash drive.

Guide List

1. How to Fix USB Flash Drive Not Showing Up on Mac

Well, there are workable ways to troubleshoot Mac not detect your USB flash drive. Just make sure there are no serious physical damages on your flash drive.

Later, you can get your USB flash drive back to work on Mac successfully.

Method 1: Check If Your USB Flash Drive Is Plugging in Properly

Unplug your USB flash drive.

Re-plug your USB flash drive to another USB port or external USB hub on Mac.

Wait for a while to see if the USB flash drive shows up on Mac or not.

Method 2: Make Sure Mac Has Detected the USB Flash Drive

Click Finder > Applications > Utilities > System Information.

Find and choose USB in the left panel. Mac os x for desktop. Check the detailed USB flash drive information.

If the USB flash drive not showing up on Mac, you can reconnect the USB flash drive to have a second try.

Method 3: Find Your USB Flash Drive in Finder Preferences

Click Finder > Preference > General.

Make sure the External disks options are marked.

Choose Sidebar. Then mark External disks under the Devices category.

Check if the USB flash drive is visible on Mac now.

Method 4: Repair USB Flash Drive Not Showing Up with First Aid

Run Finder > Utilities > Disk Utility.

Choose the USB flash drive's name in the left panel.

Click First Aid on the top toolbar. Then choose Run to confirm.

Select your USB flash drive and choose Unmount on the top of the window.

Unplug your USB flash drive. Plug it back to Mac in 10-12 seconds. Check if the USB flash drive not showing up on Mac desktop still exist.

2. Cannot Open or Write Your USB Flash Drive? Here Is Your Best Solution

Even though Mac can read your USB flash drive, you may not open or access files saved in the USB drive. It is another change after you fixing USB flash drive not showing up on Mac, Disk Utility or Finder.

Best Flash Drives For Macs

During this time, you can run FoneLab Data Retriever to recover data from USB flash drive selectively. The Mac file recovery software allows users to recover photos, videos, music, documents and many other files from a corrupted or formatted USB flash drive in high quality. You can recover the selected data or entire USB flash drive to Mac in clicks.

1. Main Features of the Mac Data Recovery Software

1. Recover USB flash drive data on Mac from mistaken deletion, formatted partition or other crashed problems.
2. Wide support of recoverable data types, such as photos, documents, emails, videos, etc.
3. Run Quick Scan or Deep Scan mode to scan for deleted or lost data in your USB flash drive thoroughly.
4. Support USB flash drive data recovery on Mac 10.7 and above versions.
5. Fully compatible with Sandisk USB flash drives, as well as other flash drive

FoneLab Data Retriever

FoneLab Data Retriever - recover the lost/deleted data from computer, hard drive, flash drive, memory card, digital camera and more.

• Recover photos, videos, documents and more data with ease.
• Preview data before recovery.
• Recover data from device, iCloud and iTunes.

Flash Drive Not Showing Up Windows 10

Step 4: Type: diskutil list and tap Return. When the USB flash drive disappears from the Terminal list, you can close the window.

Step 5: Close Terminal and open Console to check errors of your USB flash drive.

Step 6: Click 'Errors and Faults' to check if there are any errors of your USB flash drive.

Reconnect the USB flash drive back to your Mac. Your USB flash drive will be detected and work again after the operations listed above. After completing the above steps, you can check and use all files on the USB flash drive.

5Reset the System Management Controller (SMC)

Resetting System Management Controller can be very helpful because it restores your Mac to full normal functionality particularly relating power and hardware. Non-functioning USB ports might be an indication that your Mac needs an SMC reset. Use the following steps to reset SMC:

Start by Shutting down the Mac, disconnect the battery or power cord then Press the power button holding it down for at least 5 seconds. After that, reconnect the power cord or battery and Turn the Mac on.

For Mac Book

For Mac Notebooks which do not have removable batteries, use the following steps to reset your SMC. However, this differs and does not work on external keyboards so it is preferable to use built-in keyboards. Firstly, shut down the Mac Book and Connect the power cord. Then, hold the following keys simultaneously; 'Shift+Control+Option', Release all the keys at the same time and Start the MacBook.

In cases where the above method does not work as expected you can reset the PRAM/NVRAM. The following steps will solve the problem: Firstly, shutdown the Mac Book and hold down the following keys, Command + Option + P + R to restart the Mac. https://awentogte1975.mystrikingly.com/blog/supro-guitars-serial-numbers. These keys should held down until a sound beeps and screen flashes then you should allow the system to boot normally.

Restore Data from USB Flash Drive Not Showing up on Mac with AnyRecover

After fixing USB flash drive not showing up on Mac problem, data loss may occur. Don't panic. You can use data recovery software to restore your lost data from the USB flash drive. AnyRecover Mac Data Recovery is a USB data recovery software which is worth trying. It is able to recover photos, videos, documents and other file types from your external storage devices easily and quickly.

What Are AnyRecover's File Recovery Features?

AnyRecover is a premium data recovery software that helps you recover deleted lost webcam videos.

It offers you enhanced recovery rate such as improved search criteria, high speed recovery.

It is compatible with all storage devices and supports over 1000 file types including document, video, email, photo, and audio etc.

https://coolofiles799.weebly.com/malwarebytes-premium-3-0-2-422.html. Retrieve lost files from MacBook, iMac, MacBook Pro, MacBook Air, Mac Mini, Mac Pro, etc.

Recover lost data from the not showing up USB flash drive and unmountable USB flash drives.

Support Mac OS X 10.15, Mac OS X 10.14, Mac OS X 10.13, Mac OS X 10.12, Mac OS X 10.11, Mac OS X 10.9.

Steps to Recover Data from USB Flash Drive Not Showing up on Mac with AnyRecover:

Step 1: Download and install AnyRecover, connect the USB flash drive to your computer before the recovery process. Then select the location where you want to recover from, then click Start.

Step 2: AnyRecover would scan through the location of USB flash drive.

Step 3: Once scan is completed, you will be able to preview the files and recover it by clicking the 'Recover' tab.

To some degree, a USB flash drive can work as your portable hard disk. You can save photos, videos, documents and other files to the USB flash drive.

As a result, you can open those files on any computer after plugging the USB flash drive into the USB port. If you cannot see the flash drive mount on Mac, you just get into annoying trouble.

http://txqnvm.xtgem.com/Blog/__xtblog_entry/19077276-affinity-photo-beta-1-7-0-112#xt_blog. So why is your USB flash drive not showing up on Mac? Here are common reasons for USB flash drive not detected or recognized problems. Thus, you can find the corresponding solutions to fix USB flash drive not showing up or recognized on Mac.

1. Physical damages.
2. The USB port is not working.
3. Format the USB flash drive improperly.
4. USB firmware is corrupted.
5. The outdated system cannot recognize your USB flash drive.

Guide List

1. How to Fix USB Flash Drive Not Showing Up on Mac

Well, there are workable ways to troubleshoot Mac not detect your USB flash drive. Just make sure there are no serious physical damages on your flash drive.

Later, you can get your USB flash drive back to work on Mac successfully.

Method 1: Check If Your USB Flash Drive Is Plugging in Properly

Unplug your USB flash drive.

Re-plug your USB flash drive to another USB port or external USB hub on Mac.

Wait for a while to see if the USB flash drive shows up on Mac or not.

Method 2: Make Sure Mac Has Detected the USB Flash Drive

Click Finder > Applications > Utilities > System Information.

Find and choose USB in the left panel. Mac os x for desktop. Check the detailed USB flash drive information.

If the USB flash drive not showing up on Mac, you can reconnect the USB flash drive to have a second try.

Method 3: Find Your USB Flash Drive in Finder Preferences

Click Finder > Preference > General.

Make sure the External disks options are marked.

Choose Sidebar. Then mark External disks under the Devices category.

Check if the USB flash drive is visible on Mac now.

Method 4: Repair USB Flash Drive Not Showing Up with First Aid

Run Finder > Utilities > Disk Utility.

Choose the USB flash drive's name in the left panel.

Click First Aid on the top toolbar. Then choose Run to confirm.

Select your USB flash drive and choose Unmount on the top of the window.

Unplug your USB flash drive. Plug it back to Mac in 10-12 seconds. Check if the USB flash drive not showing up on Mac desktop still exist.

2. Cannot Open or Write Your USB Flash Drive? Here Is Your Best Solution

Even though Mac can read your USB flash drive, you may not open or access files saved in the USB drive. It is another change after you fixing USB flash drive not showing up on Mac, Disk Utility or Finder.

Best Flash Drives For Macs

During this time, you can run FoneLab Data Retriever to recover data from USB flash drive selectively. The Mac file recovery software allows users to recover photos, videos, music, documents and many other files from a corrupted or formatted USB flash drive in high quality. You can recover the selected data or entire USB flash drive to Mac in clicks.

1. Main Features of the Mac Data Recovery Software

1. Recover USB flash drive data on Mac from mistaken deletion, formatted partition or other crashed problems.
2. Wide support of recoverable data types, such as photos, documents, emails, videos, etc.
3. Run Quick Scan or Deep Scan mode to scan for deleted or lost data in your USB flash drive thoroughly.
4. Support USB flash drive data recovery on Mac 10.7 and above versions.
5. Fully compatible with Sandisk USB flash drives, as well as other flash drive

FoneLab Data Retriever

FoneLab Data Retriever - recover the lost/deleted data from computer, hard drive, flash drive, memory card, digital camera and more.

• Recover photos, videos, documents and more data with ease.
• Preview data before recovery.
• Recover data from device, iCloud and iTunes.

Flash Drive Not Showing Up Windows 10

2. How to Recover Data from Your USB Flash Drive on Mac

Run Mac data recovery software. Plug the USB flash drive to Mac. Make sure your Mac can recognize the flash drive.

Select the recoverable data type and flash drive based on your need.

Click Scan to scan the plugged USB flash drive quickly.

Select, preview, search, filter and mark any deleted or existing file saved in the USB flash drive before.

Click Recover to complete USB flash drive recovery on Mac.

If you still have the USB flash drive not showing up on Mac issue after above solutions, the USB drive might be damaged physically.

Moreover, you can also recover data from partition hard drive, recover hidden files on Mac and more.

In this circumstance, you can go to the local stores or specialists for suggestions. If you want to extract data from your corrupted USB flash drive only, Data Retriever is your one-stop solution. You can free download the data recovery software whenever you need.

Related Articles: